We want to welcome Yudor to our supported line for our mobile cctv software Vidcam Editions.  We support both Yudor DVR & Ip Camera lines.  They have been tested on all phone types and below is a link to a demo video showing Yudor in Total Control on iPhone Vidcam Edition.

Thanks to Yudor for their support so we could properly add them to the Total Control family of supported cctv hardware.

Total Control iPhone Vidcam Edition Yudor Demo Link

Added support for Apexis Ip Camera line for Android, Blackberry, Iphone, Itouch, Ipad, & Winmo Vidcam Editions.

Example Youtube Demo Videos:

Total Control Android Vidcam Edition Apexis Video Demo Link

 Total Control Blackberry Vidcam Edition Apexis Video Demo Link

 Total Control Ipad Iphone Vidcam Edition Apexis Video Demo Link

 We want to thank the people over at Apexis for working with us to provide full support for Apexis Ip Cameras.

Enjoy the ability to have the application automatically start a camera when you open it.

 Full Tutorial located here:

http://totalcontrolapp.com/index.php?option=com_content&task=view&id=180&Itemid=25

Demo video here (starts at 4:29):

 http://www.youtube.com/watch?v=t2EbdmwProY

Added to Aviosys as a confirmed software partner.  Aviosys is known for the 9100 4 channel video encoder as well as their newer 9070 ip camera.

Direct Link Here: http://www.aviosys.com/software_partner.html

We are pleased to announce support for APC Netbotz.  These are appliances used to monitor typically commercial establishments such as DataCenters.  We now directly support the video from the Netbotz in our applications so people can monitor their Netbotz from their cell phones/handheld devices remotely.

 More information on Netbotz can be found here:

We are pleased to announce support for Aviosys products including their new 9070 line in our mobile phone applications.

You can see our section on the Aviosys website here:

 Aviosys Website Total Control Section

Also we have some videos located on our Youtube channel at:

• Added support for some entry level nvr solutions
• Active Webcam
  
• AbelCam
• WebcamXP
• Added support for some dvr
• Avtech (only models that have a jpg function.  see forum for videos and contact us for direct testing ahead of time).
• Dedicated Micros
• APC Netbotz
  
• Arecont Vision (cropped images at 320x240  only)
• Allnet
• Aviptek
• Bosch (added ptz support on WinMo version)
  
• BSTI
• Cellvision
• Cisco
• Compu-Shack Electronic
• Convision
• Corega
• Digicom
• Digi-Lan
• Digitus
• Elro
• Eyseo
• Flexwatch
• Genius
• Grand
• Hunt
• IDView
• Kingnow
• Linkpro
• Lorex (added support for new ptz series)
• Moxa
• Optelecom-nkf
• Shenzen Sunsky
• Siemens
• Skyway Security
• Trendnet (updated ptz & mpg4 on some models)

added or changes:

• samsung gvi (blackberry only)
• icamview pro (only pro model supported.  plus model not supported)
• zavio
• axis (m series)
• webcam xp (added ptz controls and support for more cameras)
• bluenet video server
• aviosys (correction 9060 model support does NOT include O/I series)
• Acti mjpg support ( firmware version V3.10.20 minimum required).  Contact us directly for specific instructions.

  
  

Apple has finally approved all versions of the vidcam app for the app store.  They are available if you search for 'ip camera' or 'Intelligent Designs'.

Versions now available:

Singlecam

Multicam4, 8, 16, 32, 64

We have successfully tested the following new Manufacturers for compatibility with our application.  At the very least we will be able to support straight jpg refresh video.  In many cases we will support more than that however.

We will be adding these to the Supported & Compatibility Lists shortly

1. Bosch:  ip cameras and video encoders
2. Sentry360:  ip camera
3. Basler:  ip camera
4. BWA:  mobile video encoder
5. Appro:  ip camera
6. Lumenera:  ip camera
7. Sanyo:  ip camera
8. Goscam:  ip camera