Welcome to Total Control: Video Camera Edition.  Here you will find information regarding our video surveillance software.  Below we have the single camera 'Singlecam' edition for control and viewing of one supported camera or video encoder as well as Multicam versions for viewing/controlling multiple supported cameras and video encoders (for analog camera & dvr support).  All versions support the same functions and are named according to how many video feeds they support (i.e. if you want to support 4 video feeds then you will purchase Multicam4 edition).

Ipad Notes Click Here

The following versions are currently available via the App Store:

• Singlecam
• Multicam4
• Multicam8
• Multicam16
• Multicam32
• Multicam64 

TO PURCHASE PLEASE VISIT THE APPLE APP STORE

• Click Here To Visit SingleCam   Edition On The Itunes Store
• Click Here To Visit Multicam4   Edition On The Itunes Store
• Click Here To Visit Multicam8   Edition On The Itunes Store
• Click Here To Visit Multicam16 Edition On The Itunes Store
• Click Here To Visit Multicam32 Edition On The Itunes Store
• Click Here To Visit Multicam64 Edition On The Itunes Store

Screenshots: Singlecam

      

Screenshots: Multicam

Features: Singlecam

• Iphone and Ipod Touch compatible
• Ipad compatible (see Ipad Notes section)
• Single dvr, ip camera, or video encoder stream support
• 1 & 4 port video encoder support (selected models) for analog camera & dvr support.  Limited to 1 port.
• Unlimited video on cellular and wifi unlike other apps
• Support for authentication
• Support for Pan, Tilt, & Zoom (on supported models)
• Use of swipes for Pan & Tilt as well as pinches for Zoom
• Ability to change ip address and port as desired for internal and remote use
• Support for over 95 manufacturers and 500+ models
• Direct stream connection.  No video going through 3rd party servers
• No monthly or annual subscriptions
• Support for landscape and portrait mode
• Jpg snapshot capability (while viewing live stream) to save to your local photo gallery.  View or email from there
• Support for MJPG and JPG codecs as supported.  Mjpg is preferred method of video streaming when supported.  Jpg used for jpg refresh (when mjpg not supported) and snapshots 

Features: Multicam

• Iphone and Ipod Touch compatible
• Ipad compatible (see Ipad Notes section)
• Support for up to 4, 8, 16, 32, & 64 dvr, ip cameras and video encoder streams (depending on version)
• Unlimited video on cellular and wifi unlike other apps
• Single & MultiChannel video encoder support (selected models) for analog cameras support.
• Support for authentication
• Support for Pan, Tilt, & Zoom (on supported models)
• Use of swipes Pan & Tilt as well as pinches for Zoom
• Ability to change ip address and port as desired for internal and remote use
• Support for over 95 manufacturers and 500+ models
• Direct stream connection.  No video going through 3rd party servers
• No monthly or annual subscriptions
• Function to easily change cameras while viewing. 'Previous Camera' and 'Next Camera' function in menu while viewing to automatically change camera.
• Function to automatically rotate through cameras based on time period. For instance set the application to rotate to the next camera every 30 seconds automatically
• Support for landscape and portrait mode
• Jpg snapshot capability (while viewing live stream) to save to your local photo gallery.  View or email from there
• Support for MJPG and JPG codecs as supported.  Mjpg is preferred method of video streaming when supported.  Jpg used for jpg refresh (when mjpg not supported) and snapshots

Supported Manufacturers

Compatibility List Click Here

• 4xem
• 7links
• AbelCam
• ABS
• Acti (contact us for special instructions)
• Active Webcam
• Afreey
• Airlink
• Airlive
• Airship (DVR)
• Allnet
• Apc Netbotz
• Apexis
• Appro
• Arecont Vision
• Astak (DVR)
• Avermedia (NV & SA Series Only)
• Aviosys
• Aviptek
• Avs
• Avtech (DVR.  DO NOT PURCHASE BEFORE READING THE FAQ & CONTACTING US FIRST!) Avtech Special Instructions Click Here 
• Axis
• Basler
• Blue Iris
• BlueNet (Video Encoder)
• Bosch
• BSTI
• BWA
• Canon
• Cellvision
• Cisco
• Compu-Shack Electronic
• Conceptronic
• Convision
• Corega
• CPcam (DVR.  DO NOT PURCHASE BEFORE SPEAKING WITH US.  CONTACT US 1ST!)
• Dedicated Micros (Click Here For Special Instructions)
• Defender USA (DVR)
• Digicom
• Digifort (NVR)
• Digi-Lan
• Digitus
• Divis (DVR)
• D-Link (see faq regarding these)
• Dvr USA (DVR)
• Edimax
• Elite (DVR)
• Elro
• Everfocus (DVR Paragon, Paragon264, & Ecor264, EDR-16D1/16F1, ELR-4D/4F, ERS-4 Only.  FW 1.2.11 or higher).  'enable mobile viewing' must be checked
• Evocam (MAC webcam)
• Eyseo
• Find China
• Flexwatch
• Foscam
• Fulicom
• Gadspot
• Genius
• Goscam
• Grand
• Grandtec
• HAI (Video Encoder)
• Hama
• Hamlet
• HR04_HS4200 (DVR)
• Hunt
• Hunt Elec. (Cam + DVR)
• HuntCCTV (DVR)
• iCAMView (Pro Only)
• Icantek (Cam + DVR)
• Icatch (DVR)
• IDView
• IQinVision
• Intellinet
• i-Watcher
• JVC
• KeyCamX (Mac software. see compatibility list info)
• Kingnow
• LevelOne
• LinkPro
• Linksys (see faq regarding these)
• Linudix
• Logilink
• Lorex
• Lumenera
• Merit-Lilin
• Mesa-Sic (DVR)
• Microseven
• Minitar
• Mobotix
• Moxa
• Napco
• Neugent (Video Encoder)
• Nubix (DVR.  DO NOT PURCHASE BEFORE SPEAKING WITH US.  CONTACT US 1ST!)
• Nuvico (Apex/Apex Lite DVR) Click Here For Special Instructions
• Optelecom-nkf
• Orite
• Panasonic (Cam + DVR)
• Pixord
• Rugged CCTV (DVR)
• Sanyo (Cam + DVR)
• Security Spy (MAC software)
• Sentry360
• Sharx
• Shenzen Sunsky
• Shixin
• Siemens
• Sitecom
• Skyway Security
• Smarthome
• Sony
• Speco (SIP camera only)
• Stardot
• Toshiba
• Trendnet
• Veo
• Vilar
• Vivotek
• Vpon (DVR)
• WebCamXP
• WowWee
• Xvision
• Y-Cam
• Yoics 9100a (Video Encoder Firmware)
• Zavio
• Zoneminder

Model Compatibility List:

Compatibility List Click Here

Manuals

Iphone SingleCam Manual Click Here
Iphone MultiCam Manual Click Here

Controls Reference Guide Click Here

Videos (Main Videos Below)

Iphone SingleCam Setup Demo Quicktime
Iphone SingleCam Setup Demo Iphone, Itouch Compatible

Iphone SingleCam Operation Demo Quicktime
Iphone SingleCam Operation Demo Iphone, Itouch Compatible

Iphone MultiCam Video Quicktime

The closest thing we can do for a demo on the Iphone-Itouch is to make a video of us connecting to your camera for you to view ahead of time.  If you are interested in this please follow up with us via the Contact Us page and fill in the form with details to connect to your camera. make/model/ip/port/username/password.  Thanks.

Don't have a camera or want to try out different cameras?  Try some of the Public cameras we list.  CLICK HERE...

MultiCam Edition Video

Don't see video?   or

Click Here For Hi Res Version

On Hi Res Version you may have to push the timeline a little and click play again to start the video before it fully loads otherwise you will have to wait for the whole video to load before viewing starts.

SingleCam Edition Video

Don't see video?   or

Click Here For Hi Res Version

On Hi Res Version you may have to push the timeline a little and click play again to start the video before it fully loads otherwise you will have to wait for the whole video to load before viewing starts.

Ipad Video Demo

Don't see video?   or

Click Here For Hi Res Version

On Hi Res Version you may have to push the timeline a little and click play again to start the video before it fully loads otherwise you will have to wait for the whole video to load before viewing starts.